Camera not found on HP ENVY m6 (0xA00F4244<NoCamerasAreAttached>) without camera kil

[ygerardo]

When opening up the Windows 10 Camera application, the message "We can't find your camera" with error code 0xA00F4244<NoCamerasAreAttached> appears ,  my HP Notebook PC does not have a camera kill switch

[Echo_Lake]

@ygerardo

Thank you for posting on the HP Support Community.
 

Don't worry as I'll be glad to help, I understand you are getting this error and the system camera not responding, to provide an accurate resolution, I need a few more details:

• Did you make any changes to the settings of your PC prior to the issue?
• When was the last time it worked fine?
• What is the product number of your device? Use this link to find it: http://support.hp.com/us-en/document/c03754824

While you respond to that, let's try these steps: 

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8. (Refer to the removable and sealed battery)
BIOS default:(do not skip any troubleshooting steps even if you feel steps are repeating)

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and    Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer. 

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.