-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
2
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
You could theoretically. Here is the Service Manual:
In addition to a 7 or 9.5 mm thick and 2.5 inch wide SSD or hard drive you need these parts:
(5) Hard drive bracket L20455-001
(6) Hard drive connector board L20454-001
See p. 45-49 to see how to do it. You have to add a connector board to the motherboard and then put the bracket on the driver to hold it in place while you slide the SATA connectors into the connector board.
You want to open the laptop first before buying anything as there is a chance your laptop came with a connector board but it will not have the bracket.
Parts beginning with "L" are very hard to find. HP Parts in Portugal does not have them.
We would have to search worldwide. It's probably easier and likely cheaper just to install a larger NVME M.2 SSD.
Post back with any more questions and please accept as solution if this is the info you needed.
HP Recommended
You could theoretically. Here is the Service Manual:
In addition to a 7 or 9.5 mm thick and 2.5 inch wide SSD or hard drive you need these parts:
(5) Hard drive bracket L20455-001
(6) Hard drive connector board L20454-001
See p. 45-49 to see how to do it. You have to add a connector board to the motherboard and then put the bracket on the driver to hold it in place while you slide the SATA connectors into the connector board.
You want to open the laptop first before buying anything as there is a chance your laptop came with a connector board but it will not have the bracket.
Parts beginning with "L" are very hard to find. HP Parts in Portugal does not have them.
We would have to search worldwide. It's probably easier and likely cheaper just to install a larger NVME M.2 SSD.
Post back with any more questions and please accept as solution if this is the info you needed.
2
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community