-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Compaq Prasario V3000

Create an account on the HP Community to personalize your profile and ask a question
04-07-2020 11:59 AM
Hi
I got the above laptop form, my friend, recently and I managed to install Windows 7 .32 sp1 and installed all the drivers. The Bios battery was dead and replaced with aftermarket battery - cr2032. everything looks fine. however, 2 days ago I noticed it take more time to switch bios screen to boot loader. I checked by disconnecting the keyboard, changing the RAM ...etc .
is there any posibility to change the boot order automatically ? i noticed this issue today, and I have disabled all other drivers and leave HDD only .can this happen?
Thank you
Chirath
04-13-2020 11:13 AM
@chirath Welcome to HP Community!
I understand that boot order is changing for Compaq Presario V3000.
Do not worry. I will try to fix the issue.
Please perform the Restore the default BIOS settings.
This enables Secure Boot and sets the Windows Boot Manager as the primary boot device.
-
Turn on the computer and immediately press the F10 key repeatedly, about once every second, until the HP Computer Setup opens.
-
Under the Main menu, use the down arrow key to select Restore Defaults.
Figure : Restore Defaults
-
Select Yes to load the default settings.
Figure : Click Yes
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
04-13-2020 12:27 PM
Hi
Thank you for the update. however, i did removeed the newly installed battery again fixed it back. then on the bios setting disable all other boot devices except the hard drive. after few days did not get that error again
Thank you for the valuable update
Chirath