Computer shuts down when on battery at above 80%

[LawManX]

My Spectre X360 is shutting down while on battery, Battery checks all show ok. Only possible issue shows Voltage Cell 4: 0.  (See screenshot). It shuts down within 20 minutes on battery with no warning. Battery always shows over 80%. I run the laptop almost exclusively on the ac adapter. If the battery needs replacing, I will replace it but, it seems that something else might be going on. Please help. I have deleted and reinstalled battery drivers and ran every health check I could find. Thanks in advance.

[Echo_Lake]

@LawManX

Thank you for posting on the HP Support Community.

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:

• Did this happen after a recent window or software update?
• Does the notebook shut down immediately (right after you unplug the charger)?
• Do you get any error message on your notebook (Such as Plugged in, not charging, etc.)?

While you respond to that, let's try these steps: 

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8. (do not skip any troubleshooting steps even if you feel steps are repeating)

BIOS default:

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer. If the issue persists, follow next steps.

Run hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

If the test passes, continue with these steps:

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery.

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[LawManX]

Thanks for your reply. I have tried all solutions that you mentioned. It did not happen after any particular software update. I have checked the battery. Deleted and reinstalled all drivers, etc.. Everything shows that my battery is healthy and there are no problems with my software or hardware.  I keep my notebook plugged in 99% of the time. It started over a year ago but only died when it got to 20%. Now it is dying at 90%. No warning, nothing. The notebook simply shuts down. When I plug it in and turn it on, it shows 90%  and charging. No errors of any kind.

Everything seems too indicate a bad battery but no test indicates that is true. I have no problem replacing the battery, if that is the solution. What concerns me is the fact that it might not be a battery problem, but some other system problem. I don't see any heat problems or overheating issues, which is what I thought might be an alternative explanation for the sudden shutdown.  No such luck.

ANY TEST OR ALTERNATIVE THEORY WOULD BE WELCOMED.

[Echo_Lake]

@LawManX

Thank you for posting back. 

Not to worry, I've got a few more steps to isolate the issue. 

Let's perform Windows Update and HP Support Assistant: (do not skip any troubleshooting steps if you feel steps are repeating) 

To check for updates now, select the Start button, and then go to Settings  > Update & security  > Windows Update, and select Check for updates.

Install updates from HP Support Assistant: Go to Download HP Support Assistant to install the tool.

1. To open HP Support Assistant, double-click the HP Support Assistant icon .
2. Click My devices in the top menu, and then click Updates in the My PC or My notebook pane.
3. Click Check for updates and messages to scan for new updates.
4. Review the list of updates. Updates with a yellow information icon are recommended. Updates with a blue information icon are optional.
5. Click the update name for a description, version number, and file size.
6. Select the box next to any updates you want to install, and then click Download and install.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[LawManX]

I appreciate the response. I have already kept all my updates current and have been using the HP Support system. I just tried it again. It shut down at 82% in less than 20 minutes.

[Echo_Lake]

@LawManX

Thank you for posting back. 

I appreciate your efforts to try and resolve the issue. I would suggest performing system factory reset will put the computer back to the original factory settings in this way all corrupted and outdated software will be removed. 

While doing the recovery there is an option to back up your personal files. If you have not previously done one now is a good time. 

Restoring Files that were Backed Up Using HP Recovery Manager (Windows)You can also contact HP support for assistance. They can remotely access your system to help alleviate difficulties: www.hp.com/contacthp/

The HP Cloud Recovery Tool allows you to download recovery software to a USB drive. You can use the downloaded recovery image file in order to install the Windows operating system. 

• Click here: https://support.hp.com/in-en/document/c04758961#AbT3to perform System Recovery (Windows 10) 
• Click here: https://support.hp.com/in-en/document/c06162205 to Use the HP Cloud Recovery Tool (Windows 10)

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.