-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Device ACPI\PNP0C0A\2&daba3ff&0 was migrated.

Create an account on the HP Community to personalize your profile and ask a question
02-13-2021 11:03 AM - edited 02-13-2021 11:07 AM
The computer's battey drains in a short amount of time. Two months ago I bought a new battery because the old battery went bad. Today I rewiewed the devices adminitrator then I found the event "Device ACPI\PNP0C0A\2&daba3ff&0 was migrated" occurred on the day and time the old battery went bad. I have tried to calibrate the new battery without success. What I should do? I appreciate your advice.
02-16-2021 07:08 AM
Welcome to HP Community
I have gone through your Post and would like to help
Please reinstall the Microsoft ACPI Compliant Control Method Battery and check if that helps
Step 01. Click on the Start Button
Step 02. Type "Device Manager" in the start search box & open the Device Manager
Step 03. Look for Batteries and expand it by click on the + symbol on the left
Step 04. Right Click on "Microsoft ACPI Compliant Control Method Battery" & uninstall
Note: This Battery driver will get re-installed automatically when you restart the Notebook again
Step 05. Please Shutdown the Notebook
Step 06. Remove the Battery and unplug the Power Adapter ( For Notebooks with Removable Batteries )
Step 07. Press and Hold the Power Button for full 1 Minute
Step 08. Go ahead and put back the Battery and connect the Power Adapter and restart
Next update the BIOS from this Link: https://support.hp.com/us-en/drivers
If the issue persists run a Battery Test again to confirm the Hardware Functionality
- Hold the power button for at least five seconds to turn off the computer.
- Turn on the computer and immediately press Esc repeatedly, about once every second.
- When the menu appears, press the F2 key.
- On the main menu, click Component Tests and Power > Battery
Let me know how it goes 😊
If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
KrazyToad
I Am An HP Employee