• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
Locked

‎03-30-2017 02:13 AM

HP Recommended
Product: HP EliteBook 820 G3
Operating System: Microsoft Windows 10 (64-bit)

I tried to connect my HP Compaq LE1911 monitor to my HP EliteBook 820 G3 via Display Port to VGA port, but it's not working.

 

I tried connecting the monitor via purely VGA port in the laptop, it works fine, so I am guess it's the display port driver not supporting Windows 10.

 

I have read the thread below, tried install sp73303.exe but doesn't work.

 

please help.

16 REPLIES 16

‎03-30-2017 02:22 AM

HP Recommended

Connect the HP Compaq LE1911 to your notebook only with a VGA to VGA cable. 

 

That is how it was meant to be connected.

 

I cannot imagine why you would do otherwise.

 

Don't expect to see a high resolution image on an analog LCD display. It is not an option.

 

If you want a high rez digital image on a display, then replace your LCD analog display with a display that has a DVI input and connect it.


I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



Was this reply helpful? Yes No

‎03-30-2017 02:24 AM

HP Recommended

Hi,

 

Why not simply use VGA to VGA ? DP to VGA won't give you anything good interms of diaplsy but cost, because from DP (Digital) to VGA (analog) you need a proper converter not driver.

 

Hope this makes sense.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




Was this reply helpful? Yes No

‎03-30-2017 02:24 AM

HP Recommended

The reason for this is that I havee two HP LE1911 monitors and I need 2 screens for my work.  Any other possible solution?

Was this reply helpful? Yes No

‎03-30-2017 02:26 AM

HP Recommended

To 

Was this reply helpful? Yes No

‎03-30-2017 02:28 AM - edited ‎03-30-2017 02:32 AM

HP Recommended

Use a port replicator or laptop dock that has two VGA ports.

 

See the followng web page at NewEgg.com. It shows what you need.

https://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=port+r...


I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



Was this reply helpful? Yes No

‎03-30-2017 02:31 AM

HP Recommended

Hi,

 

Sorry I did not know you connect 2 monitors - it MAY work with 1 digital and 1 VGA, normally it only work one or other, not both at the same time.

 

As @erico said above "Use a port replicator or laptop dock" would fit your need.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




Was this reply helpful? Yes No

‎03-30-2017 02:32 AM

HP Recommended

To: I have heard that port replicator can only do duplicate screen, however I need extension screen.

 

Even HP sell display port to VGA adaptor, only question it said 'Using the HP DisplayPort to VGA Adapter may require an update to the graphics driver installed on your system. '

 

That's why I am asking, because I need some kind of updates in my laptop for it to work.

 

thanks!

Was this reply helpful? Yes No

‎03-30-2017 02:34 AM

HP Recommended

To 

 

 

 

Was this reply helpful? Yes No

‎03-30-2017 02:40 AM - edited ‎03-30-2017 02:43 AM

HP Recommended
@Fung wrote:

To: @erico I have heard that port replicator can only do duplicate screen, however I need extension screen.

 

Even HP sell display port to VGA adaptor, only question it said 'Using the HP DisplayPort to VGA Adapter may require an update to the graphics driver installed on your system. '

 

That's why I am asking, because I need some kind of updates in my laptop for it to work.

 

thanks!

It said may require, not have to install an update.

 

You can get an update from Windows update or directly from Intel.

 

Connect it and use the Intel HP graphics control center to setup the multiple screens.

http://www.intel.com/content/www/us/en/support/graphics-drivers/000005580.html

 

 


I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.