• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
Locked

‎12-11-2017 06:54 AM

HP Recommended
Product: ProBook 6560b
Operating System: Microsoft Windows 7 (64-bit)

I have installed an ExpressCard USB 3 controller to my notebook and set up drivers from it's CD (FLUSB3.0-3.5.18.0.exe). The drivers were not able to start (device manager sayed code 10).But the device manager sayed that the controller is Fresco Logic xHCI (USB3).

So I downloaded FLUSB3.0-3.8.33709.0.exe from https://support.frescologic.com/portal/home and installed it.

The new driver works fine when nothing is connected to the controller's USB ports.

When I connect anything to USB, the controller disappears from windows' device manager.

No power is provided via the USB (when I connect a mouse, it does not light).

The device id is PCI\VEN_1B73&DEV_1100&SUBSYS_11001B73&REV_10

 

Similar issue is in Fresco Logic FAQ, and they recommend to provide an external power, but my controller does not have a socket for external pover supply. Moreover, it also diasppears when I insert a short usb cable with unconnected other end! An emty cable cannot require a large power...

 

Help, please!

2 REPLIES 2

‎05-18-2018 07:49 PM

HP Recommended

Hello, I have the same problem. Did you ever get it to work?

Was this reply helpful? Yes No

‎05-19-2018 02:12 AM

HP Recommended

No. It does not work now.

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.