-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Fury g10 thermal and performance problems

Create an account on the HP Community to personalize your profile and ask a question
09-27-2024
06:22 AM
- last edited on
09-30-2024
12:48 PM
by
JessikaV
Hi I have some problems with zbook fury g10. I had a thunderbolt port issue (one of ports stopped working), so mainboard has been replaced and since then i have problems. During high CPU and GPU load after some time graphical performance drops (GPU TDP drops to 10W, from 100W) so even windwos interface is laggy. All time i have problems with external monitors blinking (withoud disconnecting, just one second black screen), while zbook g6 works OK. There is also problem with CPU TDP (it is limited to 96W, TDP should be 157W), after few minutes it drops a lot, while fans are almost not working. So I have mobile workstation which doesn't have performance as it should have because of thermal system which is not working with the performance it could work. In comparison with macbook, when i need performance, fans are immediately on 100% speed to cool down processor, HP is working most time at 20-30% fan speed, so it is not quiet and no performance... Do you also experience these issues?
10-04-2024 03:36 AM
Hello davidpl.
Although there are third party tools one can use to try and get rid of the various power limits, in this case it seems that there are several issues with your system and you should let HP check it out again. Quite possibly the motherboard replacement is not working as it should. Certainly seems that way.....