HDD BRACKET FOR HP ENVY X360 15M-CP011DX

[Belarus27]

Hi. 

I bought this laptop and it cane with 128gb SSD ,  i opened it up and it does have a room for hdd (which is obviously empty since i got ssd)   , but it doesnt have a hdd caddy/bracket/rubber and a hdd connector. 

I did call hp and after 30 min on the phone was able to find only the cabel part number which is 

L20103-001 hp hdd cable 

But rep on the phone advised that he dont have a number for hdd kit. 

So the question of the month is... 

 Whats the part number ?   Help is appreciated. Thank you

[Huffer · Accepted solution]

Here is the Manual:

Service Manual

(5b) Hard drive rubber sleeve L21894-001 (5c) Hard drive cable L20103-001

You need both of the above parts in order to install a 2.5 inch disk. 

These parts starting with "L" have proven very very hard to locate. Not available from the HP Parts Store:

https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=C5F0F090D44C45CE8F5C581077BB55DB&SearchIn=P...

Post back if you want us to keep trying to find the parts and we need to know where you live (country). 

[Belarus27]

Thank you that was what i needed. 

[jasper56]

Did you ever find these parts? Were you able to purchase them? I am in the same boat and need these parts to add another SSD harddrive to my Envy x360 15z-cp000 but cannot find them anywhere. Impact computers says they have the L20103 cable but upon ordering the order is canceled due to product not being available. Is there a substitue part that would work? ANY guidance would be appreciated. 

[Belarus27]

Well  , not yet , i just bought a cable and a caddy , gonna order a HDD sometime soon.   I got it from a different model but it looks like it all should fit and work.  

Once i make an attempt i will post back. 

[Belarus27]

UPDATE: 

 This happened.  Got the hard drive installed without any problem.  Had to bend the sata connector wire a little bit , but everything works perfectly.  

[sudo49]

Could you please let me know of which HDD cable and Caddy you purchased?

[jasper56]

@Belarus27, can you please post what bracket and cable part numbers you used to make this a sucess. I know many folks would like to know. Thanks in advance.

[Belarus27]

As far as caddy you can use any rubber one from different envy360 models  mine was from 15m models.

But here is the cable part number that worked

450.0BX02.0001 GLP

[jasper56]

Thank you Belarus27. I Have ordered that cable and will try it soon. I ordered it from Impact Computers. Here is the link and the HP part number associated with it:

https://www.impactcomputers.com/924326-001.html

HP part number: 924326-001

Happy computing!