HP BIOS update stuck to 1% and cannot switch off or do anything

[Gabriele82]

Hi All
Bought laptop 2 weeks ago. Lat night i did not switch it off and this morning i see a screen saying : HP BIOS update.
 Do not shut down....
Writing new Bios Image 

Progress is stuck at 1%.

I hold the power key for over 40 sec and does not switch off. I also unplugged it and nothing happen. 
Any idea?

[Riddle_Decipher]

@Gabriele82 Due to the current global COVID-19 situation, we're seeing an influx of customers coming in for support and we appreciate your patience.

Oh! that may need a BIOS recovery, a possible interruption, not deliberate, however, a power failure or a slight disconnection from the internet while downloading the BIOS update, could cause such issues, nevertheless, we have a few steps that should help resolve the issue, once and for all:

Click here to perform a hard reset on your device

If the issue persists, after the above steps, try the below:

1. Turn off the notebook.

2. Plug the notebook into a power source using the power adapter.

3. With the notebook off, press and hold the Windows logo key  and the B key at the same time.

      NOTE:

   On some notebook models, it might be necessary to press and hold the Windows logo key  and the V key.

4. While pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows logo key  and the B or V key until the HP BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

   The HP BIOS Update screen displays, and the BIOS update begins automatically. This might take several minutes, and you might hear additional beeping sounds.

   • If the HP BIOS Update screen does not display, repeat the previous steps. If the issue persists after repeating the steps, skip to the next step to Download a replacement BIOS file.

   • If the Power light turns off, the notebook has turned off because the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for 2 to 3 seconds only.

CLICK HERE FOR MORE STEPS AND INSTRUCTIONS.

(By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.