HP Omen Laptop Battery Won't Charge Past 70 Percent Right After Warranty Expired...

[mb3000]

My HP Omen Laptop Battery Won't Charge Past 70 Percent Right After Warranty Expired...

i tried all the things from this link:

https://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Battery-stops-charging-at-70/td...

And nothing fixed it.  I ran the battery test from the F2 boot menu and it said Fuse broke or something (42).  i can't look at the log right now because I don't know where it is and I'd have to reboot into the F2 menu to look at it...

[KrazyToad]

@mb3000

Welcome to HP Community

I have gone through your Post and would like to help

Please reinstall the Microsoft ACPI Compliant Control Method Battery and check if that helps

Step 01. Click on the Start Button
Step 02. Type "Device Manager" in the start search box & open the Device Manager
Step 03. Look for Batteries and expand it by click on the + symbol on the left
Step 04. Right Click on "Microsoft ACPI Compliant Control Method Battery" & uninstall
Note: This Battery driver will get re-installed automatically when you restart the Notebook again
Step 05. Please Shutdown the Notebook
Step 06. Remove the Battery and unplug the Power Adapter ( For Notebooks with Removable Batteries )
Step 07. Press and Hold the Power Button for full 1 Minute
Step 08. Go ahead and put back the Battery and connect the Power Adapter and restart

Next update the BIOS from this Link: https://support.hp.com/us-en/drivers

If the issue persists run a Battery Test again to confirm the Hardware Functionality

- Hold the power button for at least five seconds to turn off the computer.
- Turn on the computer and immediately press Esc repeatedly, about once every second. 
- When the menu appears, press the F2 key.
- On the main menu, click Component Tests and Power > Battery

Let me know how it goes 😊

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

[mb3000]

I did all that and now the battery is at zero percent.  

I get this error at startup: primary (internal) battery (601)

Running the battery test I get these errors:

Primary - Replace (40)

Logic state - bad cell (40) charge state not avaliable