-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
2
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
It most definitely has 2 memory slots and can take up to 16 gigs of DDR4:
Two SODIMM slots - customer non-accessible/non-upgradeable DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4–2133) Supports up to 16GB max system memory
Above is a quote from the Service Manual.
Start on p. 29 and note the warnings about opening the laptop being authorized only for service technicians and unfortunately I have to say you will proceed at the risk of the warranty. Still, many people choose to do it and this is one of the services this Forum, run by non-HP people, can provide, which HP itself cannot, but don't say you were not warned. It is actually about medium difficult. Motherboard removal is not required but pay careful attention to screw management and you will be OK. There is also the issue of finding compatible memory. DDR4 is pretty new to the market.
See p. 35 and this is the memory module you need by HP Part number:
8 GB 2133 MHz 1.2v DDR4 shared 820570-005
This will work:
I have a Zbook 15 G3 that uses DDR4 and I used Patriot DDR4 in mine (from Frys) and it worked fine. Running stable and in dual channel mode.
http://www.frys.com/product/8752041?site=sr:SEARCH:MAIN_RSLT_PG
If this is "the Answer" please click "Accept as Solution" to help others find it
HP Recommended
It most definitely has 2 memory slots and can take up to 16 gigs of DDR4:
Two SODIMM slots - customer non-accessible/non-upgradeable DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4–2133) Supports up to 16GB max system memory
Above is a quote from the Service Manual.
Start on p. 29 and note the warnings about opening the laptop being authorized only for service technicians and unfortunately I have to say you will proceed at the risk of the warranty. Still, many people choose to do it and this is one of the services this Forum, run by non-HP people, can provide, which HP itself cannot, but don't say you were not warned. It is actually about medium difficult. Motherboard removal is not required but pay careful attention to screw management and you will be OK. There is also the issue of finding compatible memory. DDR4 is pretty new to the market.
See p. 35 and this is the memory module you need by HP Part number:
8 GB 2133 MHz 1.2v DDR4 shared 820570-005
This will work:
I have a Zbook 15 G3 that uses DDR4 and I used Patriot DDR4 in mine (from Frys) and it worked fine. Running stable and in dual channel mode.
http://www.frys.com/product/8752041?site=sr:SEARCH:MAIN_RSLT_PG
If this is "the Answer" please click "Accept as Solution" to help others find it
2
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community