-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- HP Pavilion dv7-4065dx Display

Create an account on the HP Community to personalize your profile and ask a question
08-23-2024 07:20 AM
I got a for the screen only
I got a HP DV7-4069WM today it does power on but don't show video on the screen but on a external monitor (strange ) I then put it on my HP dv7 - 4065dx it shows video on the screen
can bad memory slots on the one I got (which don't matter as I only needed the screen anyway) cause it not to show video on the screen but only on a external screen?
Just wondering as again only needed the screen but if it is a easy fix would be good to have a extra lower half got this
Thank you
Todd
Solved! Go to Solution.
Accepted Solutions
08-23-2024 02:51 PM
If it were a bad board likely would not show on an external monitor. Either the cable is bad or there is some fault with the slot where the screen cable plugs into the board (OK that is a type of bad board but not a bad gpu).
08-23-2024 08:44 AM
I suggest the following.
Connect the external screen and boot up and log into Windows.
Use the Windows key + the P key to enter presentation mode.
Choose "Duplicate" to see if the laptop's display turns on.
If it does, enter presentation mode again and select PC only so the laptop's screen will stay on.
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
08-23-2024 12:41 PM
I think it is a bad board as it shows no display when powering on maybe a bad connector on the motherboard and Bios has no setting for it
Too bad oh well like before only really needed it for the display and the case is not to bad too
Thank you
Todd
08-23-2024 02:51 PM
If it were a bad board likely would not show on an external monitor. Either the cable is bad or there is some fault with the slot where the screen cable plugs into the board (OK that is a type of bad board but not a bad gpu).
08-28-2024 05:44 PM
Si I got the video cable for my display and still shows nothing on the screen I also noticed the laptop I got for the screen now stopped working in this too is it not the same even thro both are 400 series one has a video GPU with vinyl cover and other don't
one board number is
HP Pavilion DV7 DV7-4000 605496-001
.other is
DV7-4000 Series AMD Motherboard 615686-001
is there a difference between them and maybe it is a bad video connector as new cable did not work
Todd
08-30-2024 08:37 PM
I found a 17.3 lcd not the original one to see if it will boot the screen lite up it did so it has a bad backlight
screen I used is grainy probably because it is not the one for it
I also found by way of the looking at it I need a n17306-l02 and the internet says that it is compatible with a B173RW01-V3 which I can get for 15.00 is that true that the B173RW01-V3 is the Compatible With HP PAVILION DV7
I was looking at item 276267063540 on eBay which has no picture but item 226301053872 of the same thing as a image of the screen and a site says B173RW01 V.3, N173O6-L02 C3, LP173WD1 (TL)(N2) 17.3" LED Glossy Screen WXGA++ Display Compatible With HP PAVILION DV7
I asked the seller on this and waiting reply
Tod