HP ZBook Fury G11 16" WUXGA upgrade to samsung 990 ssd

[jjvdb1]

sa512 GB PCIe® Gen4 NVMe™ TLC M.2 SSD  is in the laptop,  i want to upgrade to a 

Samsung 990 Pro 4TB PCIe Gen4 NVMe M.2 SSD

what issues can i expect, has the fury the ability to run this  ssd to its highest specs? 

[tk_srq]

@jjvdb1,

The service manual (on page 2) states that your model supports M.2 NVMe gen4x4 SSD up to 4 TB in capacity, so a 4 TB Samsung 990 Pro SSD should work to its fullest specs.

Maintenance and Service Guide HP ZBook Fury G11 Mobile Workstation

[jjvdb1]

thanks for the reply it was helpful

the fury seems to have  only 500gb ssd

i see many youtubes on upgrading ssd,    i dont want to upgrade and replace it, 

but i want to add 4TB  samsung 990 .     

is that a problem?  do i simply add it to any slot that is spare?   assuming slot 3 is the one that will be free for instance?

[tk_srq]

I suppose HP tested and verified 4 TB M.2 NVMe gen4x4 SSDs work properly in ZBook Fury G11.

So, you can expect a 4 TB Samsung 990 Pro gen4 SSD to work fine in your model.

See the note on page 51 of the manual that reads," NOTE: To ensure correct operation, the 4 TB SSD must be installed in drive slot 2 or 4." This tells you a 4 TB Samsung must be installed either in M.2 slot 2 or 4.

Also, read instruction #9 on page 54 that indicates M.2 SSDs must be installed in sequential order.

You need to read pages 51-54 of the manual carefully.