-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Its specs
https://support.hp.com/au-en/document/c06723973
It has 8 GB DDR4-2933 SDRAM (1 x 8 GB) now. You can upgrade to
- 16GB: add same existing RAM to slot 2 or using https://www.crucial.com/memory/ddr4/ct8g4sfra32a/ct19224023 (RAM will run at 2933MHz)
- 32GB: install 16GB each to both slots using https://www.crucial.com/memory/ddr4/ct2k16g4sfra32a/ct19224058 (Ram will run at 2933MHz)
- 64GB: install 32GB each to both slots using : https://www.crucial.com/memory/ddr4/ct2k32g4sfd832a/ct19224049 (Ram will run at 2933MHz)
It is better to use TWO slots same RAM to get full benefit of DUAL channel architecture.
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
HP Recommended
Its specs
https://support.hp.com/au-en/document/c06723973
It has 8 GB DDR4-2933 SDRAM (1 x 8 GB) now. You can upgrade to
- 16GB: add same existing RAM to slot 2 or using https://www.crucial.com/memory/ddr4/ct8g4sfra32a/ct19224023 (RAM will run at 2933MHz)
- 32GB: install 16GB each to both slots using https://www.crucial.com/memory/ddr4/ct2k16g4sfra32a/ct19224058 (Ram will run at 2933MHz)
- 64GB: install 32GB each to both slots using : https://www.crucial.com/memory/ddr4/ct2k32g4sfd832a/ct19224049 (Ram will run at 2933MHz)
It is better to use TWO slots same RAM to get full benefit of DUAL channel architecture.
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community