Hdd to ssd upgrade ssd not detected hp630 laptop

[Beastgamer3884]

I upgraded my laptop from hdd to ssd I installed ssd precisely and after that I turn on the laptop it says the hard disk not detected the i booted with the windows 10 installation pendrive and there i can see around 228 gb unallocated storage I tried to allocate it and got a error code after that I installed the ssd in another hp laptop and it worked just fine I installed windows in it too please tell me how can I solve this issue?

[Raj_05]

Hi @Beastgamer3884,

Welcome to HP Support Community

.  
Thank you for posting your query, I will be glad to help you.  

If you have upgraded your HP laptop's hard drive (HDD) to a solid-state drive (SSD) and the SSD is not being detected by the system, here are some troubleshooting steps you can try.

• Check the BIOS settings: Access the BIOS settings of your laptop and ensure that the SSD is being detected there. If it is not, you may need to update your BIOS or check the connections.
• Check the connections: Ensure that the SSD is properly connected to the laptop. If it is a SATA SSD, make sure the SATA connector and power cables are securely connected. If it is an M.2 SSD, make sure it is properly inserted into the slot.
• Initialize the SSD: If the SSD is detected in the BIOS but not in Windows, it may need to be initialized. Go to Disk Management in Windows and see if the SSD is listed there. If it is, initialize it and assign a drive letter.
• Install SSD drivers: Some SSDs may require specific drivers to function properly. Check the HP website for any driver downloads and install them if needed.
• Check for firmware updates: It's possible that the SSD needs a firmware update to function properly. 

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support