How do I replace Envy 17T battery

[Endofile]

After removing 8 T5 screws, how do I reove bottom cover to acces and replace battery?

[iomare]

Hi,

There are many Envy 17 series and models. Can you provide the exact model or product number for further help.

https://support.hp.com/ca-en/document/c00033108

Let me know,

David

[Endofile]

YOF94AV

[iomare · Accepted solution]

 pages 25-26 of service manual you can see how to remove the back cover and replace the battery. There are screws under the back "rubber foot" which you can remove and then replace:

http://h10032.www1.hp.com/ctg/Manual/c05130939

Once you have removed the remaining screws you can use a plastic tool such as credit card to separate the top and bottom and release the plastic hooks.

Let me know if you need further help,

David

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

[Endofile]

Thanks! I knew there were more screws somewhere. The cover was still attached too tight after the screws on the edge and the edge was freed. Wish I could have found that manual on my own. Thanks you again.