How i can upgrade ram from default ram stick to 4gb to 8gb without blank screen?

[w1therrex]

I tried to upgrade ram by replace original ram into other stick but seems it didn't start and not boot into windows.

Is there any way to replace original ram with 8gb or 16gb ones?

(The original ram from my laptop only have 4gb)

[Huffer · Accepted solution]

Yes it will take up to a pair of 16 gb DDR4-3200 SO-DIMM modules. Here is the Service Manual:

Manual 

Memory replacement covered on p. 35. You need to get stock OEM memory, not super performance "gaming" type memory. Stock Crucial Samsung, Hynix, etc. Also stay away from Kingston Value RAM. No "Fury", "Ripjaws", etc. 

Memory module, 16 GB (DDR4-3200)  L67710-001

https://www.amazon.in/Crucial-16GB-Laptop-Memory-CT16G4SFRA32A/dp/B08C511GQH/ref=sr_1_1?crid=RYM4JNK...

Post back with any more questions and please accept as solution if this is the info you needed. 

[w1therrex]

Does this mermory count?

It's samsung original mermory, it's stock mermory i think

The left one is 8gb i purchased, while the right ones is original 4gb from laptop

Here's package

 I tried to remove original ram with kingston ram but it seems it didn't allow me past post stage. The screen just blank

Kingston ram which i tried to replace (it's a ddr4 2666, non gaming type):

[Huffer]

The DDR4-2666 is not what you need. The Samsung 8gb appears to be right but you have blocked out quite a bit. Does none of this memory work for you other than the original 4 gb stick?

[w1therrex]

I added plus with 8gb ram for 4gb original at last time i ran and it works. I will check to see if  8gb ram work or not 

Also, here's ram what are u looking for (8gb ddr4 3200):

[w1therrex]

After i tried to remove 4gb ram stick and it works! Thanks for help