-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- How to add SSD, when missing SATA socket and cable to FRP

Create an account on the HP Community to personalize your profile and ask a question
12-02-2021 01:44 PM
Hi,
I looking at installing a hard drive (2,5" SATA SSD) in my HP Laptop 15-dw1xxxx series PC.
There's space for a hard drive.
No SATA connector.
No serial cable connecting to FPR socket (there two available FRP1 and FRP2).
Have I got this right?
Can I install the missing socket and cable (provided I'm able to buy these items online) just like that. And be able to just plug in a SSD and I'm good to go?
Or would there be need for further setup / configuration?
Have attached an image for info.
Solved! Go to Solution.
Accepted Solutions
12-03-2021 05:40 AM
You need these:
Hard drive board L52024-001
Hard drive cable L52025-001
See p. 33 of the Service Manual here:
Maintenance and Service Guide HP 15 Laptop PC
L52024-001 HP HDD Board mit Kabel 15-dw2025cl "Klasse A" | eBay
Post back with any more questions and please accept as solution if this is the info you needed.
12-03-2021 05:40 AM
You need these:
Hard drive board L52024-001
Hard drive cable L52025-001
See p. 33 of the Service Manual here:
Maintenance and Service Guide HP 15 Laptop PC
L52024-001 HP HDD Board mit Kabel 15-dw2025cl "Klasse A" | eBay
Post back with any more questions and please accept as solution if this is the info you needed.