How to install replacement Hard Drive for an HP Envy 360

[LBSteve]

I need help to install a new replacement Hard Drive for my HP Envy 360 Laptop.

[CF4 · Accepted solution]

Hi

Could you please expand on the

MAKE, MODEL, OS and SKU?

WinKey + R and type msinfo32 then look at line 9 for the SKU.

The generic envy 360

Results for "HP Envy 360" (30)

https://support.hp.com/gb-en/product/hp-envy-13-ag0000-x360-convertible-pc/20270313/manuals

http://h10032.www1.hp.com/ctg/Manual/c06027358

Page 30   NB: The links are GENERIC.

Solid-state drive
1-TB, PCIe, TLC  L19583-001
512-GB, PCIe, TLC  L19582-001
512-GB, PCIe, value L19585-001
256-GB, PCIe, TLC  L19580-001
256-GB, PCIe, value  L19584-001
128-GB, SATA-3, TLC  L19579-001
Solid-state drive Mylar shield
L19790-001 (Foil Kit)
Before removing the solid-state drive, follow these steps:
1.  Shut down the computer. If you are unsure whether the computer is off
 or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.  Disconnect all external devices connected to the computer.
3.  Disconnect the power from the computer by first  unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.  Remove the bottom cover (see Bottom cover  on page 25).
5.  Disconnect the battery (see Battery on page 27).
Remove the solid-state drive module:
1.  Remove the Mylar shield from on top of the module.
NOTE:
The Mylar shield is available in the Foil Kit, spare part number L19790-001.
2.  Remove the Phillips M2.0×3.0 screw  that secures the module to the computer.
3.  Remove the module  by pulling it away from the connector.
Reverse this procedure to install a solid-state drive.

[LBSteve]

Kudos to you for the solution to my question. Much appreciation to you and the whole community.

 Steve Headrick

[CF4]

Prego.