-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- How to repair touchpad ribbon cable locking tab on the conne...

Create an account on the HP Community to personalize your profile and ask a question
05-03-2020 01:47 PM - edited 05-03-2020 03:13 PM
I lost the piece brown plastic locking tab at holds the touchpad ribbon cable to the cable mount base female connector on the (motherboard/system board) because it came out of the female connector when I was upgrading. Now the touch pad cable will not stay in!
How to repair broken touchpad cable mount female connector on motherboard?
how many pins dose the touch pad female connector have on it?
Were can buy the touch pad female connector just get brown plastic clamp?
Any help would be appreciated so don't have to get new mother board system board or new computer
!
05-11-2020 05:18 AM
Welcome to HP Community
I have gone through your Post and I understand your concerns
You might need to check with a local computer hardware store since this particular part is not available separately
Else you can contact HP Support for Service Options
1) Click on this link - www.hp.com/contacthp/
2) Select your product type below.
3) Enter the serial of your device.
4) Select the country from the drop-down.
5) Select the chat or get phone number options based on your preferences.
6) Fill the web-form and proceed further.
Thank you
If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
KrazyToad
I Am An HP Employee