I want to install on my HP 250 G6 Notebook PC, an SSD on M2. the connector M2 missing

[Marian20]

Hello, I want to install on my HP 250 G6 Notebook PC, an SSD on M2. Although in the technical specifications it is specified that the memory can be installed on M2, when I wanted to install it I found that the connector on the motherboard is missing. Why it was not installed and what can be done in this situation.

Thanks in advance for your help.

[banhien]

@Marian20 

There are MANY models/products from same 250 G6 series. Some models/products have M.2 slot, some don't. What is the CPU and main storage of your machine now ?

Regards.

[Marian20]

Thank you for your attention and response.
I attach the list of features and an image (not at all encouraging) of the motherboard with the place where the M2 connector should be.

Processor

2,00 gigahertz Intel Core i3-6006U

128 kilobyte primary memory cache

512 kilobyte secondary memory cache

3072 kilobyte tertiary memory cache

64-bit ready

Multi-core (2 total)

Hyper-threaded (4 total)

Memory Modules c,d

4014 Megabytes Usable Installed Memory

Slot 'Bottom-slot 1(left)' has 4096 MB (serial number

1B350F71)

Slot 'Bottom-slot 2(right)' has 4096 MB.

Main Circuit Board b

Board: HP 8328 23.78

Serial Number: PGNFRN51TAK3I0

Bus Clock: 100 megahertz

UEFI: Insyde F.65 12/06/2019

Controllers

Intel(R) 6th Generation Core Processor Family Platform

I/O SATA AHCI Controller

Drives

498,78 Gigabytes Usable Hard Drive Capacity

426,30 Gigabytes Hard Drive Free Space

hp DVDRW DA8AESH [Optical drive]

Kingston DTR30G2 USB Device [Hard drive] (62,91 GB) --

drive 1, s/n 0B80690166E8

ST500LT012-1DG142 [Hard drive] (500,11 GB) -- drive 0,

s/n WBYJ998L, rev 1003YAM1

Thank you again !