-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- INVERTER HP HDX18 1390el

Create an account on the HP Community to personalize your profile and ask a question
06-21-2021 04:44 AM
hi to all, new here .
I've the screen problem...(and reading on the net seem to be the inverter)
My pc is the HP HDX18 1390el
- on the external monitor work.
- the backlight sometimes light up for some second
- however the image is displayed when point the light
- when open or close the display, or after suspended, the backlight light up for some second.
so I've disassembled the screen, and the inverter number is
TBD512NR-1AS023217502
Now my question is: do i have to buy the same or is there any compatible inverter?
This, is good for to replace my inverter? (the number is different (AS023220500)
http://www.laptopabc.co.uk/inverter/hp-hdx-x18-lcd-inverter.html
thanks to who will answer
06-21-2021 05:16 AM
Hi,
Yes, the one you linked should works as it is for the same series.
The actual part number is 498324-001
very difficult to find with part number for this "older" machine
Example
https://it.aliexpress.com/item/32812456583.html
Could not find the service manual here on the HP site. However you could take a look here
https://www.manualslib.com/manual/71738/Hp-Hdx-18.html?page=26#manual
Hope it helps,
David
Please click on thumbs up for thanks
Please click on accept as solution if answered your question
06-21-2021 05:35 AM
wow thanks so much!!
I also find this (from France):
https://it.computer-world.pro/tbd512nr1as023217502-tbd512nr1-as023217502-ea12b512t-p-39471.html
i want to contact the customer service for to ask if is good for me.
I will keep you informed
07-09-2021 09:08 AM
ok
i bought fda aliexpress the inverter posted and now work!!
I just say thank you.
I had the touch problem ... after reassembling the frame.
ok .. I think the flat .. it was now broken .. so I cut the broken part, remove the paint, and insert. (using the cut part to make thickness)
ok now the leds work, but do not respond altouch.
so I found the solution:
after checking with task manager the process named hpkbdapp.exe (in fact it was not present)!
turn off the pc
remove the battery.
press and hold the power button for 45 seconds.
then leave it for a few minutes.
put the battery back and pray that's that.
in my case it worked.
07-13-2021 05:41 AM
I am happy you sorted it all out and got it working again.
Take care,
David