Install SSD on laptop

[Abhinav10]

@Banhein

I have inserted Crucial P2 250GB 3D NAND NVMe PCIe M.2 SSD - CT500P2SSD8 into my HP Pavilion 15 cs-1000tx. It is showing in my computer but not in the BIOS menu. I want to install my windows 10 on the SSD but I'm being able to do. So please help me out of this problem so that I can install the OS on the SSD.

[praveen196]

@Abhinav10 Welcome to HP Community!

I understand that M2 SSD is not showing on the BIOS.

Please perform the below steps and check.

Hard Reset:

1) Shutdown the computer.  

2) Unplug all the Adapter and peripherals connected.  

3) Remove the Battery. ( not for Built-in Battery computer ) 

4) Press and hold down the power button for 15 to 20 seconds.  

5) Plug-in the Adapter and put the Battery back into the computer if it's a (removable battery)

6) Try to turn on the computer and check, If the issue persists continue next step

Set BIOS default and restart:

1. Restart your notebook.
2. During startup, press F10 repeatedly until the BIOS menu is displayed.
3. Once the BIOS menu is displayed, press F9 to restore factory defaults.
4. Select Yes to confirm.
5. Press F10 to save changes and exit.
6. Select Yes to confirm.
7. The computer restarts using the default settings.

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!