Laptop battery draining after installing ssd

[Ishan9]

Hello..i have a hp da0326tu laptop and i installed a 240gb WD sn350 ssd..but after installing it i noticed the battery is draining and the underside is warming up where the battery is..what is the reason for this?

[A_Gayathri · Accepted solution]

Hi @Ishan9,

Welcome to the HP Support Community

I understand you are facing a battery-related issue with your HP Laptop. Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• May I have the exact model name of the product? Refer to this document for steps to find the product details. Do not share any of your personal information such as serial, phone number, email ID, etc.

Let's try the below Troubleshoots steps. 

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

Step 2

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and Restart the unit

Step3

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

Update the BIOS, Video card & Chipset drivers:

• Here's the link to download and install the above updates: Click here

Perform Windows Update and HP Support Assistant: (do not skip any troubleshooting steps if you feel steps are repeating) 

To check for updates now, select the Start button, and then go to Settings  > Update & security  > Windows Update, and select Check for updates.

Install updates from HP Support Assistant: Go to Download HP Support Assistant to install the tool.

1. To open HP Support Assistant, double-click the HP Support Assistant icon 

1. Click My devices in the top menu, and then click Updates in the My PC.
2. Click Check for updates and messages to scan for new updates.
3. Review the list of updates. Updates with a yellow information icon are recommended. Updates with a blue information icon are optional.
4. Click the update name for a description, version number, and file size.
5. Select the box next to any updates you want to install, and then click Download and Install.

If the issue still persists, then please follow the below steps:

Let's try reinstalling the Microsoft ACPI-Compliant Control Method Battery 

1) In the search box, type, and open “Device Manager”. 

2) Expand “Batteries”. 

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

4) Click on “Uninstall”. 

5) At the prompt put a check in the box to remove the current driver 

6) Shut down the computer. 

7) Remove the battery for a minute and then put it back in. 

😎 When the computer comes back up it should automatically find the driver. 

9) Go to Device Manager. 

10) Expand Batteries. 

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software". Do the same thing with Microsoft ACPI-Compliant Embedded Controller. 

Let us try Battery Calibration,

Please charge your computer for 100% and disconnect the charger and continue working on it till the battery drains completely to 0% then connect the charger and  once the unit charged  100% then check 

Also, try updating the computer:

Step 1 Windows Updates - 

1) In the search box, type, and open Windows Updates. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer. 

Step 2 HP Support Assistant Updates:

1) In the search box, type, and open HP Support Assistant. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer. 

 HP Notebook PCs - Battery does not power notebook or hold a charge

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Ishan9]

Thank you so much for taking your time to help me out..i will be happy if you can help me with one more thing that is i have installed the ssd and moved windows to it but the hars disk doesn't turn off after the time i have specified in advanced power settings..what should I do?

[A_Gayathri]

@Ishan9,

Thank you for your response, I really appreciate your efforts. This needs one-on-one interaction hence I'm sending a private message to assist you with the next action.   I'm sending out a private message to assist you with the next course of action. 

Please check your Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link.

Hope this helps! Keep me posted for further assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!