• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP ENVY Notebook - 15-k207nx (ENERGY STAR)
Microsoft Windows 10 (64-bit)

I decided to upgrade my old HP ENVY 15-k207nx (Energy star) since it was running slow on the HDD. Got a new Samsung SSD 980 M.2 NVME as i noticed my board had an M.2 adaptor in it when i was changing out the old RAM cards.

But after installation, I can't seem to find the SSD anywhere, not in the Disk management, not during windows installation via a bootable usb nor in disk drivers.

The fixes i tried:-

1. Updated Bios

2. Updated drivers

3. Tried to install Intel IRST VMD drivers from the bootable usb but it showed the drivers are not supported for your system (which i donot understand because the system definitely has an M.2 slot on the motherboard and I'm positive i have installed it properly)

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Elder_Blood wrote:

I decided to upgrade my old HP ENVY 15-k207nx (Energy star) since it was running slow on the HDD. Got a new Samsung SSD 980 M.2 NVME as i noticed my board had an M.2 adaptor in it when i was changing out the old RAM cards.


@Elder_Blood 

 

No, M.2 NVMe won't work. Please use M.2 SATA drives for dual storage option.

 

Regards.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




View solution in original post

3 REPLIES 3
HP Recommended

@Elder_Blood wrote:

I decided to upgrade my old HP ENVY 15-k207nx (Energy star) since it was running slow on the HDD. Got a new Samsung SSD 980 M.2 NVME as i noticed my board had an M.2 adaptor in it when i was changing out the old RAM cards.


@Elder_Blood 

 

No, M.2 NVMe won't work. Please use M.2 SATA drives for dual storage option.

 

Regards.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended

Thank you for the response, I'll try with a M.2 SATA

HP Recommended

Would you also please tell me the maximum space that my system can support for the M.2 SATA

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.