M.2 or NVMe slot available on Envy 15-as166nr

[EdiDany]

hello.

how do I configure an M.2 NVMe PCIe on my HP Envy 15-as166nr.
I acquired Ssd 512gb M.2 Hp Ex920 Pcie Ger 3.0 X4 Nvme 3d Nand.
if you can help me Thanks

[Echo_Lake]

@EdiDany
Welcome to HP Forums,

This is a great place to get support, find answers and tips,
Thank you for posting your query, I'll be more than glad to help you out 🙂

After reading your post, I did go through the Product specifications of your product and found that you have 1 TB 5400 rpm SATA hard drive installed on the PC.

Next thing, I would suggest here is to go through the Maintenance and Service guide of your HP notebook, and found that your PC supports for next-generation form factor (NGFF), M.2 solid-state drive, default with SATA/PCIe co-layout port.

Before starting, be sure you have all your data-files backed up and the drive should be completely RAW and uninitialized.

Support for the following solid-state drives:
512-MB, M.2, PCIe, NVMe solid-state drive supporting triple-level cell (TLC) Part no: 857487-001

You can order Certified HP Genuine Replacement Parts from a known and trusted source: Click here

Hope this helps! Keep me posted for further assistance.

If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below,

Followed by clicking on "Accept as solution" from the drop-down menu on the upper right corner,

Thank you for posting in the HP Support Forum.  Have a great day!