-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
10
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
The industry has to be faulted for this. Memory is described in two ways, by how many "turns" per second it can make (hz) and also by how much data can go through it in a set amount of time (bandwidth). So in this case DDR3L-1600 means it is DDR (double data rate) 3rd version and can turn up to 800 times per second which you double to make 1600. The L means low voltage 1.35 volt operation. That same memory can also be described as PC3L-12800. That means again it is 3rd generation low voltage but the 12800 means how many megabits of data can flow through it in a second.
So DDR3L-1600 = PC3L-12800 they are the same thing and you can buy one to run with the other. The other thing to watch out for is density. You should not mix modules with 8 blocks on the side with modules having 4 blocks on the side.
Post back with questions but please "Accept as Solution" to help others if this is the answer you needed.
HP Recommended
The industry has to be faulted for this. Memory is described in two ways, by how many "turns" per second it can make (hz) and also by how much data can go through it in a set amount of time (bandwidth). So in this case DDR3L-1600 means it is DDR (double data rate) 3rd version and can turn up to 800 times per second which you double to make 1600. The L means low voltage 1.35 volt operation. That same memory can also be described as PC3L-12800. That means again it is 3rd generation low voltage but the 12800 means how many megabits of data can flow through it in a second.
So DDR3L-1600 = PC3L-12800 they are the same thing and you can buy one to run with the other. The other thing to watch out for is density. You should not mix modules with 8 blocks on the side with modules having 4 blocks on the side.
Post back with questions but please "Accept as Solution" to help others if this is the answer you needed.
10
0
0
HP Recommended
10
0
0
HP Recommended
HP Recommended
From the Manual:
Memory modules (PC3L-12800, 1600-MHz, DDR3L) 8-GB 693374-001
10
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community