-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- No screws provided for installing M.2 SSD

Create an account on the HP Community to personalize your profile and ask a question
09-02-2022 06:20 AM
I have a 500 GB HDD and an empty slot for an M.2 SSD. So I wanted to install a 240 GB M.2 SSD to boost the speeds. But when I opened the back panel I did not find any screw to attach the m.2 SSD. Normally these are provided with the motherboard itself but it’s not the case here. After looking at the manual I found I needed a Phillips PM2.0×4.0 screw but that’s not easy to buy. What should I do? The screw that’s fixed with the WiFi card is the same. Should I remove that screw and use it for the SSD?
09-02-2022 02:02 PM
No, you have to buy yourself. Some M.2 SSD vendors do supply a screw with their products but the problem in many cases that screw won't physically fit. You can buy a set and select which one is the right one
https://www.amazon.com.au/SGTKJSJS-M-2-Screw-NVMe-Mounting/dp/B07Q3DLCJ4
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.