-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- PCI Data Acquisition and Signal Processing Controller

Create an account on the HP Community to personalize your profile and ask a question
08-02-2022 03:19 PM
Hello,
I have a HP Pavillion 15t-cs200 CTO and I have just upgraded it from windows 10 to 11. I have been able to load all the drivers except for one. The driver that I can seem to find is for the PCI Data Acquisition and Signal Processing Controller. Would anyone be able to tell me which driver would work for this OS?
Thanks.
Solved! Go to Solution.
Accepted Solutions
08-02-2022 03:59 PM
Hi:
That device can be installed by two different drivers, so there is no telling which one it will be.
I will give you both:
Install this one first and restart the PC.
Intel Chipset Installation Utility
https://ftp.hp.com/pub/softpaq/sp101001-101500/sp101171.exe
If that driver does not install the device, this one should.
Intel Dynamic Platform and Thermal Framework Driver
08-02-2022 03:59 PM
Hi:
That device can be installed by two different drivers, so there is no telling which one it will be.
I will give you both:
Install this one first and restart the PC.
Intel Chipset Installation Utility
https://ftp.hp.com/pub/softpaq/sp101001-101500/sp101171.exe
If that driver does not install the device, this one should.
Intel Dynamic Platform and Thermal Framework Driver