• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended

I have bought and cloned on my 4TB m2 ssd my current 500Gb HDD and am trying to use it as the bootable drive and will use my HDD as a storage drive until I buy myself a 5TB HDD. But something is causing it to not boot up, I used DiskGenius to clone it. Any help is appreciated

1 REPLY 1
HP Recommended

@kamenra,

 

If the HDD is still connected, remove it and the system will boot from the M.2 drive. you can then install the HDD back for data storage.

 

If the HDD is connected, it is assigned disk 0, as it is the original boot drive, and the M.2 drive has disk 1.  If both drives are bootable, the system will most likely boot from disk 0. So you need to remove the HDD temporarily.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.