• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Notebook 14-cf0006ne (4UF13EA)
Microsoft Windows 10 (64-bit)

Hi all,

 

My new laptop came with 4GB RAM, and I need to add another 4GB. I checked the memory module specs in my laptop’s Maintenance and Service Guide and this is an excerpt:

“DDR4-2666 bridge to DDR4-2400 dual channel support (i7-8565U, i5-8265U processors)

DDR4-2400 dual channel support (i7-8500U, i5-8250U, i3-8130U processors)”

 

So in a perfect world, since my CPU is i5-8250U I should get a 4GB DDR4-2400 module, and end of story. I thought it would be better to match with the existing module so I looked it up using HWiNFO and CPU-Z, but was surprised to find it DDR4-2666 not 2400 as supposed to be, although actually running at 2400MHz as shown in the screen shot!

 

HWInfo2.jpg

 So now I’ve become confused and have 3 questions:

 

1. Does this mean that my laptop has a DDR4-2666 bridge to DDR4-2400 instead of just DDR4-2400 as shown in the manual? Or maybe HP just simply ran out of DDR4-2400, so they used a higher compatible module?

 

2. What is this DDR4-2666 bridge to DDR4-2400 anyway, and what’s the use of it if it will be running at the lower speed of 2400MHz? Moreover, I looked up i7-8565U and i5-8265U CPUs on Intel website and it specifies DDR4-2400 for both not 2666! So why is HP using this bridge for them?

 

3. Which speed should I get for my laptop, 2666 or 2400? Even though it’s a bit more expensive and it doesn’t really make much sense to me since it will be running at 2400 only, I feel more inclined to getting 2666 in order to match with existing. Should I do this, or follow the manual?

 

Appreciate your replies.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi:

 

Since your notebook has the 8250U processor, the 'bridge' term does not apply, according to the manual.

 

I don't even know what the term means since the other processors mentioned in the 'bridge spec' also run at 2400 Mhz.

 

I cannot find a definition for bridge as to how it pertains to the subject at hand.

 

Your processor runs at 2400 Mhz, so the 2600 MHz memory downclocks to 2400 Mhz.

 

I don't believe that HP ran out of the PC2400 memory.

 

They probably install it for the entire model series.

 

What should you do?

 

If it were me, I would buy a chip with matching specs as the one in there now.

View solution in original post

3 REPLIES 3
HP Recommended

Hi:

 

Since your notebook has the 8250U processor, the 'bridge' term does not apply, according to the manual.

 

I don't even know what the term means since the other processors mentioned in the 'bridge spec' also run at 2400 Mhz.

 

I cannot find a definition for bridge as to how it pertains to the subject at hand.

 

Your processor runs at 2400 Mhz, so the 2600 MHz memory downclocks to 2400 Mhz.

 

I don't believe that HP ran out of the PC2400 memory.

 

They probably install it for the entire model series.

 

What should you do?

 

If it were me, I would buy a chip with matching specs as the one in there now.

HP Recommended

@Paul_Tikkanen

Thank you very much for your reply.

 

Since my notebook is still under warranty, I checked with my local HP Support as well. They informed me that it wouldn't make any difference, but I decided to follow your advice and go for matching specs. I was able to get an identical RAM chip online, and now I'm happily running a PC with 8GB RAM :generic:

HP Recommended

You're very welcome.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.