Raid Config HP Envy 15t-ep000

[ddhakandd]

I want to configure RAID0 in BIOS settings or Intel Optane Memory and Storage Management App but I could not.
Bios shown "There is no disk" warning.

Create raid settings not active In Intel Optane Memory and Storage Management App.

[banhien]

@ddhakandd 

Your machine is a CTO machine, we can't get its specs but from the manual, the series supports

• 2 TB, M.2 2280, peripheral component interconnect express (PCIe), non-volatile memory express (NVMe)-3×4, SuperSpeed (SS) solid-state drive with triple layer cell (TLC)
• 1 TB, 2280, PCIe-3×4, NVMe, SS solid-state drive with TLC
• 1 TB, M.2, PCIe, NVMe solid-state drive with TLC, RAID 0 + 1 TB, M.2, PCIe, NVMe, solid-state drive with TLC
• 512 GB, M.2 2280, PCIe-3×4, NVMe solid-state drive with TLC
• 256 GB, M.2 2280, PCIe-3×4, NVMe solid-state drive with TLC
• 256 GB, M.2, PCIe, NVMe solid-state drive with TLC, RAID 0 + 256 GB, M.2, PCIe, NVMe solid-state drive with TLC
• 512 GB, 2280, PCIe-3×2×2, NVMe + 32 GB 3D Xpoint solid-state drive

Which option did you pick ? Only the last option has Optane and this should be already setup, you don't need to do anything.

Regards.