cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
TusharTanvir
New member
2 1 0 0
Message 1 of 3
500
Flag Post

Solved!

Ram and ssd upgrade

HP Recommended
Hp 250 G6 3168ngw
Microsoft Windows 10 (64-bit)

I want to upgrade ram and ssd on my leptop. Is my leptop support Nvme m.2 ssd or i should use sata?

 

And about ram i want to use Corsair Vengeance SODIMM DDR4 2400MHz CL16 Memory. 2*8=16. Is it okay for my leptop? 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
iomare
Level 15
Level 15
12,365 9,621 2,456 4,619
Message 2 of 3
Flag Post
HP Recommended

Hi,

If you have an Intel Core CPU (not Pentium or Celeron), the PC will support 16GB of RAM DDR4 2400Mhz and the Corsair should work.

The machine support only M2 SATA3 SSD

You should check if the slot is present on motherboard 

On page 40 of service manual you can see the steps to remove the bottom cover

http://h10032.www1.hp.com/ctg/Manual/c05485525.pdf

 

iomare_0-1634141142493.png

 

If the slot is there you can install an M2 SATA 3 SSD from your preferred brand and capacity.

 

Hope it helps,

David

Please click on Yes for thanks

Please click on accept as solution if answered your question

 

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
iomare
Level 15
Level 15
12,365 9,621 2,456 4,619
Message 2 of 3
Flag Post
HP Recommended

Hi,

If you have an Intel Core CPU (not Pentium or Celeron), the PC will support 16GB of RAM DDR4 2400Mhz and the Corsair should work.

The machine support only M2 SATA3 SSD

You should check if the slot is present on motherboard 

On page 40 of service manual you can see the steps to remove the bottom cover

http://h10032.www1.hp.com/ctg/Manual/c05485525.pdf

 

iomare_0-1634141142493.png

 

If the slot is there you can install an M2 SATA 3 SSD from your preferred brand and capacity.

 

Hope it helps,

David

Please click on Yes for thanks

Please click on accept as solution if answered your question

 

Was this reply helpful? Yes No
TusharTanvir
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Thanks for reply. I just ordered that ram 

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation