Battery Draining completely even in sleep mode

[Kishorp]

I own a HP latop : HP Envy 13-ah  running on windows 10 with all the latest updates.

Let me explain the difference between sleep mode and hibernate mode.. Sleep mode uses battery and in hibernate mode the battery shoud not be used.  Basically in hibernate mode the entire RAM content is written onto the hard disk and system basically hibernates.  This is where I am facing the problem , my system drains upto 15 percent in a day in hibernate mode.  The battery is dead in a week.  This is my 10th laptop and i have not faced this issue before...  

[Jeet_singh]

@Kishorp,

Thank you for posting your query on HP Community,

Have you tried charging your laptop using a different adapter or battery?

In the meantime, let's try these steps here: 

Try charging your laptop with a higher wattage adapter and check if it helps.

To perform a power reset on a laptop with a removable battery, use the following steps:

1. Turn off the computer.

2. Remove the computer from any port replicator or docking station.

3. Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.

4. Unplug the AC adapter from the computer.

5. Remove the battery from the battery compartment.

6. With the battery and power cord unplugged, press and hold the Power button for about 15 seconds to drain any residual electrical charge from the capacitors.

7. Insert the battery and plug the AC adapter back into the laptop, but do not connect any of the peripheral devices.

8. Press the Power button to turn on the computer.

   The computer starts normally or a startup menu opens.

      NOTE:

   If your computer does not start after pressing the Power button, then a power reset did not solved the startup issue. See Additional resources for further troubleshooting steps.

9. If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key.

10. After Windows opens, reconnect each peripheral device that was disconnected, one device at a time, until all devices are reconnected.

11. Your laptop has been reset. After a power reset, it is a good idea to run Windows Update and HP Support Assistant to update the BIOS and device drivers. See Updating Drivers and Software with Windows Update (Windows 10, 😎 and Using HP Support Assistant (Windows 10, 8, 7) for more information.

Next thing, I would suggest here is to uninstall the battery drivers from device manager: 

Step 01. Click on the Start Button
Step 02. Type "Device Manager" in the start search box & open the Device Manager
Step 03. Look for Batteries and expand it by click on the + symbol on the left
Step 04. Right Click on "Microsoft ACPI Compliant Control Method Battery" & uninstall
Note: This Battery driver will get reinstalled automatically when you restart the Notebook again
Step 05. Please Shutdown the Notebook
Step 06. Please remove the Battery and unplug the Power Adapter
Step 07. Press and Hold the Power Button for full 1 Minute
Step 08. Go ahead and put back the Battery and connect the Power Adapter
Step 09. Look for "Plugged In Charging" message on the Battery icon

Next thing, I would suggest here is to update the Bios and Chipset drivers on your PC either from our HP support website, using this link or download it using HP support Assistant.

Download and install HP support assistant on your PC. It should automatically download and install the latest updates and drivers for your PC.

Refer this link to know how to use HP support assistant.

Try performing a clean boot on your PC and check if it helps.

From Start, search for msconfig.
Select System Configuration from the search results.
On the Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all.
On the Startup tab of the System Configuration dialog box, tap or click Open Task Manager.
On the Startup tab in Task Manager, for each startup item, select the item and then click Disable.
Close Task Manager.
On the Startup tab of the System Configuration dialog box, tap or click OK, and then restart the computer.

Refer this article to further troubleshoot battery issues with your PC. Click Here

Also, try running a system diagnostics test on your PC and check if the hardware components on your PC are functioning correctly.

Refer this article to know more information about running system diagnostics on your PC. Click Here

1. Hold the power button for at least five seconds to turn off the computer.

2. Turn on the computer and immediately press Esc repeatedly, about once every second.

When the menu appears, press the F2 key.

3. On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

4. Click Extensive Test.

5. Click Run once, or Loop until error.

While the test is running, the time remaining and test result for each component are

shown on the screen.

6. If a component fails a test, write down the failure ID (24-digit code) so you have it

available when you contact HP Customer Support. The information is also available in

Test Logs on the main menu.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!