• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Troubleshooting screen flickering issue on HP notebooks: Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended

Excuse me, sir, but I'm joining in. My laptop is an HP 14-inch Laptop PC 14-d3000 (2L0Z3AV), is it better to install Windows 10 or 11?

I also have to replace the NVME 2.0 SSD, but I don't know the slot size, whether it's really 2280 PCIE 4.0.

How do I find out the PCIE slot size of my NVME SSD?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi:

 

I would recommend installing W11 since W10 goes out of support in 2.5 months.

 

HP has drivers for both operating systems.

 

HP 14 inch Laptop PC 14-d3000 (2L0Z3AV) Software and Driver Downloads | HP® Support

 

Your notebook support M.2 2280 NVMe SSD's and the M.2 slot is PCIe Gen 3.0.

 

A Gen 4.0 SSD will work fine, but it will not run at its maximum advertised read/write speeds from the Gen 3 slot.

 

The max transfer speed from a Gen 3.0 slot is 4,000 MBPS.

 

Below is the link to the service teardown video:

 

Removing & replacing parts for HP 14-dq0000/d6000 | HP Support

 

 

 

View solution in original post

3 REPLIES 3
HP Recommended

Hi:

 

I would recommend installing W11 since W10 goes out of support in 2.5 months.

 

HP has drivers for both operating systems.

 

HP 14 inch Laptop PC 14-d3000 (2L0Z3AV) Software and Driver Downloads | HP® Support

 

Your notebook support M.2 2280 NVMe SSD's and the M.2 slot is PCIe Gen 3.0.

 

A Gen 4.0 SSD will work fine, but it will not run at its maximum advertised read/write speeds from the Gen 3 slot.

 

The max transfer speed from a Gen 3.0 slot is 4,000 MBPS.

 

Below is the link to the service teardown video:

 

Removing & replacing parts for HP 14-dq0000/d6000 | HP Support

 

 

 

HP Recommended

Thank you Sir

HP Recommended

You're very welcome.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.