-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
HP Recommended
Here is the Manual:
Specs say your laptop came with 1 x 4 gig modules of DDR4-2400 SO-DIMM and there is an open slot so you could add another 4 gig DDR4-2400 like this:
Max total memory is 2 x 16 = 32 gigs if you want to go that far.
Pages 30-35 of the Manual show how to access the memory slots.
Yes there is an M.2 slot and you can see where it is here:
Takes EITHER a PCIe/NVME M.2 or a SATA type 2280 form factor mSSD disk.
Above link is for the fastest kind...PCIe/NVME.
Post back with any more questions but please accept as solution if this is the info you needed.
Specifications Mfr Part Number: MZ V7E250E Capacity: 250GB Form Factor: M.2 2280 Interface: PCIe Gen 3.0 x4, NVMe 1.3 NAND Flash: Samsung V NAND 3 bit MLC Controller: Samsung Phoenix Controller Cache Memory: Samsung 512MB Low Power DDR4 SDRAM Performance: Sequential Read Speed: Up to 3,400 MB/s S...
CT16G4SFD824A is a 16GB DDR4 Notebook module that operates at speeds up to 2400 MT/s and has a CL17 latency. It is an Buffered SODIMM. It conforms to the industry standard DDR4 SODIMM layout of 260 pins and is compatible with systems that take DDR4 2400MT/s SODIMM memory.
5
1
1
HP Recommended
I saw only one notch in the on-board m.2 slot , image below. But the SATA SSD I have ordered has two notch, will it be compatible?
HP Recommended
Yeah. No problem. An M.2 slot such as you have will take "M" key (one notch) or B + M (two notch). The entire gold connector part is the same width and either will slide into the M.2 slot.
5
1
1
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community