Replacing HDD with SSD

[GRVH]

Hi, i am in huge problem as i couldn't find any solution all over the internet for the following problem.

I have replaced my laptop HDD with CRUCIAL BX500 240GB SSD and installed Windows 10 (64bit) through a bootable USB stick. When windows installation completes and laptop restarts it does not boot and shows "Disk read error". (For your kind information i have used two different SSDs but same error occurred, when i used the same SSD in other Desktop , it is working fine in the desktop).

I also ran Hardware diagnosis in BOOT screen, but is showing "Hard Disk Error (301) & (303)". Though my SSD is new and it is working fine on other systems.

I have tried every possible solution but nothing worked.

Tried converting MBR to GPT then GPT to MBR .But nothing happened. Same error "Disk read error".

My laptop SATA cable and all other fittings are in running and perfect condition as it runs perfectly with HDD. 

Please anyone help, otherwise that SSD is just waste of money for me.

(And sorry for my bad english)

[Huffer]

Using current model SATA SSDs on older laptops particularly those with a SATA II bus can lead to unpredictable results. Crucial SSDs for some reason have been hit or miss with HP laptops. I suspect if you tried a different SSD, and particularly an older model 2.5 inch SATA SSD it would work. Something like Samsung 840 or 850 Evo.