cancel
Showing results for 
Search instead for 
Did you mean: 
MKJ3
New member
2 1 0 0
Message 1 of 3
97
Flag Post

SSD Upgrade for my HP 14-DQ1033CL

HP Recommended
HP 14-DQ1033CL
Microsoft Windows 10 (64-bit)

Hello HP Community,

 

I have been struggling with getting a definite answer for upgrading the SSD of HP 14-DQ1033CL, but have only read confliction recommendations.

 

My current configuration is:

  • Processor: Intel i5-1035G4 4-Core
  • OS: Windows 10, 64-bit
  • RAM: 4GB RAM
  • Storage: 128 GB M.2 SSD

I would appreciate your recommendations based on your own experience, especially which SDD transfer speeds are compatible with the motherboard (2,400 Mb/s or 3,400 Mb/s)

 

Thanks,

RMZ

2 REPLIES 2
banhien
Level 19
Level 19
90,490 90,367 11,618 24,910
Message 2 of 3
Flag Post
HP Recommended

@MKJ3 

 

The specs of your machine is

           https://support.hp.com/au-en/document/c06463284

 

It has 128 GB M.2 SSD which is an M.2 SATA SSD drive. Page 2 of the Maintenance and Service Guide shows it supports BOTH M.2 SATA and NVMe SSD. But it has M.2 SATA now therefore it is much safer to use M.2 SATA SSD to upgrade. You can use Device Manager to see what it is now.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



Reply
0 Kudos
MKJ3
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Hello BH,

 

Thanks for your reply, I have cloned my HP hard drive onto the new SSD and replaced it successfully.

Upon booting up the machine, I'm faced with Windows going into "Automatic Repair", so what did I miss? Shall I change anything in the BIOS? Please help! and suggest some steps to look into and remedy this situation.

 

Thanks,

RMZ

 

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation