-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: SSD specifications and install instructions for primary ...

Create an account on the HP Community to personalize your profile and ask a question
05-24-2022 02:09 PM
I believe I can add a second SSD to my laptop. But I was looking for size specificatons and any special instructions beyond bolting it in
05-24-2022 05:14 PM
You can download the service manual for the laptop you have here; https://support.hp.com/ca-en/product/omen-16.1-inch-gaming-laptop-pc-16-c0000/2100371407/manuals
It should tell you in there what size type of M.2 drive you can fit (2280, 2260, or 2242) it is most likely 2280.
05-25-2022 09:31 AM
Good starting info, I believe you are right about 2280.
It gave the specs on the two possible ones that could have been installed. But it doesn't specify the dimension limitations (primarily thickness) that would fit. I also was wondering if there was a drive capacity limit. I know thickness restrictions might make the capacity size for me but it would be nice to know if there was one. I know I could probably find an SSD that matched those dimensions but was wondering if it could be thicker.
I noticed on mine the primary drive had a foam pad (not sure if it was a heat pad or not) between the SSD and cover. But the spare drive location did not have a pad on the cover. Should I be able to add a heat pad to the cover to protect it.
Thanks again