• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
Omen 15
Microsoft Windows 10 (64-bit)

Hello I have an OMEN 15-AX001NS (F4W14EA#ABE) HP, I changed the ssd from a 128GB M.2 Sata 3 to a 512 Gb M.2 NvMe (HP ex950). My system is functioning correctly after installing Windows 10. 

 

I have the following issue, the speed test on my new ssd is 1.6 Mb/s of read performance, but It should be accordingly to the box around 3.5GB/s.

 

I have read on the internet that I can to make some changes in the BIOS to activate pcie ports, but since the process could be critical I was looking for some guidance. 

1 REPLY 1
HP Recommended

@DulceDeLeche 

 

Looks like the M.2 slot on your machine supports BOTH SATA and NVMe therefore it won't run full speed of PCIe 3x4

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.