-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- SanDisk SDHC card

Create an account on the HP Community to personalize your profile and ask a question
11-26-2023 04:02 PM
Sirs,
SanDisk SDHC card used and recorded on a trail camera, does not register when placed in SD drive slot. The Drive (G) does not appear in 'This PC' listing. No response either when an external card reader is used in the USB slot..
Solved! Go to Solution.
Accepted Solutions
11-27-2023 08:35 AM
Hello Banhien,
Thank you once again.
I have tried one of the Recommendations to find a solution and yes it has worked. I uninstalled the Controller via the Device Manager and a PC restart reinstalled to complete the correction.
Thank you again for your attention. I don't know what we would do without you guys. You are like a lifeboat institution.
Regards,
Sweetcorn024
11-26-2023 05:52 PM
Can other computer read your card ? Can your computer read a different card ? It can be a different letter, not 😧
Regards,
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
11-27-2023 07:07 AM
Hello Banhien,
Thank you for your response; I'm very grateful.
The SD card plays on another computer. Other SD cards do not play on this PC either via the SD slot or via an external reader.
When the card is in place, ;Norton 360' comes on screen and invites me to scan the USB Expansion Drive, but the drive does not appear on 'This PC' 'Devices and Drives' page.
What size hammer do you suggest?
Regards,
Sweetcorn024
11-27-2023 08:35 AM
Hello Banhien,
Thank you once again.
I have tried one of the Recommendations to find a solution and yes it has worked. I uninstalled the Controller via the Device Manager and a PC restart reinstalled to complete the correction.
Thank you again for your attention. I don't know what we would do without you guys. You are like a lifeboat institution.
Regards,
Sweetcorn024