• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended

I am trying to update the BIOS for my Victus Gaming Laptop 16-s0xxx but when I use the HP support to scan for the computer match it only comes up with a Victus Gaming Laptop 16-s0075nr (with my serial # and product #).  Would it be safe to install the BIOS for the Victus Gaming Laptop 16-s0075nr since it does list the correct serial # and product #?

4 REPLIES 4
HP Recommended

Just to note - I'm trying to do this because I'm getting the issue of my power button blinking and making the screen go black.  I've tried all of the other suggestions like draining the power, etc. 

HP Recommended

Answer to your comment - Do bios update at your own risk as it shouldn't be interrupted and may not able to fix the issue if it causes any interruptions.

 

As for your  question, very likely, because Windows display 16-s0xxx as a generic family name, while 16-s0075nr is your laptop's exact sub-model.  BIOS installer utility checks your motherboard's System Board ID (SSID) before flashing anything. If a BIOS file is ever incompatible with your hardware, the installer will automatically block the update rather than risk damaging your laptop or show it on the screen. Check and confirm ID is same of new and previous version before proceeding. 

 

Also first check the link below fully especially "Update the BIOS manually from within Windows":

https://support.hp.com/us-en/document/ish_4208192-2358829-16

 

Some precautions to take before and during Bios Update:

  1.  Keep your laptop connected to AC power throughout the entire process so it does not lose power mid-update.
  2. Close background apps. Save any open work and close all running programs before launching the installer. Do not open any app during the process and do not disconnect or connect any device. 
  3.  Your laptop will reboot automatically, and the fans may spin loudly while the screen stays black for a minute or two. Avoid pressing keys, touching the trackpad, or holding the power button until Windows fully reloads.
HP Recommended

Thanks for the reply.  I wanted to add the message hat I got after my computer restarted from the hard shut down.  Also when I go to hat link you provided.  I have tried to do the " Update the BIOS from within the BIOS", but the clicking the F10 button numerous times doesn't do anything.  Is there another way to get to this?

Thanks!

"bios message.jpeg

HP Recommended

Turn off the laptop, disconnect the charger and other peripherals, hold the power button for around 60 seconds, do this 3 times  then reconnect the charger, and try to boot

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->