• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Here is the solution to resolve for 5 Long and 3 Short Blinks on your HP Laptop Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Pavilion x360 Laptop - 14t-dh200 CTO

I have an HP - Compaq Pavilion x360 14-dh100 CTO and looking to replace my Optane drive. For some reason, I can't get the computer to read the entire drive. It only reads 12.7gb of the drive, while it came with 16+256. I looked on crucial's website and found one. However, I believe none of them have Optane and I can't find anywhere to deactivate Optane on my computer. What are my options?

1 REPLY 1
HP Recommended

You list 14t-Dh200 CTO but also mention 14t-Dh100 CTO.  In any event HP no longer has detailed specifications for either system.  I managed to find something here that approximates what you discussed.

 

quote "256 GB Intel SSD + 16 GB Intel Optane memory"

 

The disk partition should look something like the following that I found.

BeemerBiker_0-1702420176222.png

 

The above 27 is what is available out of 32gb for speeding up the "C" drive which is 512gb

 

You have 12.7 and it is speeding up the 256 drive.  Your "C" drive should be 256gb in size.   Although disk 0 and 1 are listed, in reality there is only one memory stick, the "m.2"   The "oem" partition should be something like "HP windows recovery" maybe.

 

This only happens if you enable RST (Intel rapid storage technology) in the BIOS.  If your bios is set for AHCI or RAID then RST is not enabled.   You also need to have the intel RST driver installed in windows as discussed here  

https://support.hp.com/us-en/document/c05591811

 

Possibly I can help you if you have problems but long ago I removed my Optane m.2 and replaced it with a fast 1TB NVME and enabled AHCI 

 


Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.