-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: Upgrade options for HP Pavilion g4-2149se Notebook PC

Create an account on the HP Community to personalize your profile and ask a question
11-24-2017 08:53 AM
I am wanting to upgrade my RAM and hard drive for my notebook. I was wanting to know if this is even possible with this "obsolete" laptop I have. IF it is, then I need guidance on all that I need to accomplish this including what new drivers/software it would take to accomplish this.
Solved! Go to Solution.
Accepted Solutions
11-24-2017 01:17 PM - edited 11-24-2017 01:22 PM
You are going to completely disassemble a computer and I have to explain to you what a memory module is? OK, here we go:
You need a pair of these:
Memory modules (two, DDR3-1600 MHz, PC3-12800): ● 4 GB Memory modules (two, DDR3-1600 MHz, PC3-12800): ● 4 GB 641369-001
You need an SSD:
That link lets you choose either a 256 or 512 gig version of the SSD based on your budget.
Lastly, the CPU/APU:
I think we found good prices on all 3 of these.
I linked you to the Service Manual. You will need to reinstall Windows onto the SSD. Several ways to do it. WIndows 10 is the easiest and we can walk you through cloning, backup and restore or new clean install of which I like the latter option best.
Post back with any more questions and give it a "Solution" if it answered your inquiry so other can find it on the internet.
11-24-2017 09:34 AM - edited 11-24-2017 09:36 AM
It is possible but truthfully most people who inquire into this never actually go through with the project. Your laptop would take 8 gigs of RAM rather than the 4 you have, but you have 2 x 2 gig modules so you would have to toss them and get 2 x 4 and that would cost maybe $70. You could install a solid state drive but that would be maybe $100 for a 256 gig SSD and about $150 for a 512 gig. The processor can be upgraded to an AMD A10-4600M which would also provide an upgrade to the video since it is an APU system with the video chip built right into the processor. This would upgrade the laptop to its highest and best configuration.
The processor would be maybe $60 used. If you can do the labor yourself you are into it maybe $250 +/-. If you have to pay a tech figure more like $400, which would be insane with new laptops at or not much more than that cost.
Post back if you want to go forward and click "Accept as Solution" if your question is answered to make it easier for others to find on the internet.
11-24-2017 01:03 PM
11-24-2017 01:17 PM - edited 11-24-2017 01:22 PM
You are going to completely disassemble a computer and I have to explain to you what a memory module is? OK, here we go:
You need a pair of these:
Memory modules (two, DDR3-1600 MHz, PC3-12800): ● 4 GB Memory modules (two, DDR3-1600 MHz, PC3-12800): ● 4 GB 641369-001
You need an SSD:
That link lets you choose either a 256 or 512 gig version of the SSD based on your budget.
Lastly, the CPU/APU:
I think we found good prices on all 3 of these.
I linked you to the Service Manual. You will need to reinstall Windows onto the SSD. Several ways to do it. WIndows 10 is the easiest and we can walk you through cloning, backup and restore or new clean install of which I like the latter option best.
Post back with any more questions and give it a "Solution" if it answered your inquiry so other can find it on the internet.
11-24-2017 01:38 PM
11-24-2017 05:14 PM - edited 11-24-2017 05:16 PM
Depends on how we choose to do it. Clean install; no. Clone, yes. Backup and recovery you need an external hard drive.
Forgive my observation it was just an attempt at bad humor. We are going to get you through this. If you are used to disassembling any electronics and can read and follow a manual this is going to be a piece of cake for you.
11-25-2017 04:40 AM - edited 11-25-2017 04:40 AM
Windows 7 or higher you can use the native Windows backup tool to make a complete backup of the hard drive with a system image and that can be used to reinstall to the new SSD and all your files and apps will be intact.
Use the 1 TB external to store the backup.