Upgrade the RAM in my Laptop

[WalkingEagle]

I have a HP Touchscreen Notebook with the following configuration.

Notebook:

Notebook Model:                   HP 15-D069WM TOUCHSMART NOTEBOOK PC F5Y20UA#ABA

Product Number:                   F5Y20UA#ABA

UUID Number:                          EB4A40B2-E87D-4305-BDD7-C4346B4CDA4F

Born On Date:                          08/26/2014

Product configuration ID:   9075100000405F10000620180

BIOS Version:                          F.11

WLAN FCC ID:                           TX2-RTL8188EE

Factory installed OS:            Win8.1

Current installed OS:            Win10 Home

RAM:

Total Memory:           6 GB

2 Card slots               for cards with the following properties.

Memory type:            DDR3L

Voltage:                       both 1.5V and 1.35V

Number of pins:       204

Speed of memory:   1600MHz

Error-checking:         Non Parity (Non-ECC).

Contact material:     Gold.

Current Card configurations:

1 ea.                          HP Part No: 691739-001 card

        Description:   2GB, 1600MHz, PC3L-12800 DDR3L dual in-line memory module (SHARED)

        Rohs:                COMPLY 2.07

1 ea.                         HP Part No: 691740-001 card

        Description: 4GB, 1600MHz, PC3L-12800 DDR3L dual in-line memory module (SHARED)

        Rohs:              COMPLY 2.07

System board (motherboard):

System Board ID:                     218F 

System Board CT Number:   PDYWAA77V6Q26E

Part No:                                       747137-501

       Description:                        HM76 chipset, with UMA graphics memory - For use in models with Win8 (Note: The                                                                        system has since been updated from Win8.1 to Win10 Home.)

       Rohs:                                     COMPLY 05

System Board CT Number:   PDYWAA77V6Q26E

Processor:

Part No:                          682417-001

        Description:          Intel Core i3-3110M dual-core processor - 2.40GHz (1600MHz memory speed, 3MB Level-3                                                      cache,   35W TDP)

         Rohs:                      COMPLY 2.08

Processor type:    Intel® Core I3-3110M CPU @ 2.40GHz

I need to increase the RAM in this Notebook in the interest of increasing my operating process speed while reducing operational failures by eliminating or at least significantly reducing virtual memory process demands.  I understand that I should be able to increase RAM in Win8 and Win10, X64 systems to 128GB. 

In researching RAM Laptop (SODIMMs) that will apparently meet my needs, I find the following:

ref: https://www.newegg.com/Product/Product.aspx?item=N82E16820148614

Crucial 16GB (2 x 8G) 204-Pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) Laptop Memory Model CT2KIT102464BF160B

        Capacity                            16GB (2 x 8G)

        Type                                   204-Pin DDR3 SO-DIMM

         Speed                                DDR3L 1600 (PC3L 12800)

         CAS Latency                    11

         Voltage                             1.35V

         ECC                                      No

         Buffered/Registered    Unbuffered

         Multi-channel Kit           Dual Channel Kit

         Heat Spreader                 No

         Pin Plating                        Gold (per illustration view)

 I am a self-taught amateur in this area.  My questions are:

1. Am I correct in assuming this Dual Channel Kit is compatible to upgrade the RAM in my Laptop?
2. If not, why not?
3. If so, will the RAM be recognized automatically or what manual adjustments to the BIO will be necessary?

[banhien · Accepted solution]

@WalkingEagle

Crucial is the most reliable vendor and it says the following parts are compatible with your computer

    http://www.crucial.com/usa/en/compatible-upgrade-for/HP---Compaq/hp-15-d069wm-touchsmart

Regards.

[WalkingEagle]

Thanks for your expert and promt response.   I presume the RAM be recognized automatically.