• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Laptop PC 15-dy2000 PC IDS Base Model
Microsoft Windows 11

Per a previous post, I tried to upgrade my internal NVMe SSD from the 256gb to a 2TB NVMe SSD. I purchased the JESOT NVMe to USB adapter along with a Western Digital 2TB Blue SSD as the article suggested. When I plug it into the USB port, the JESOT adapter is recognized but all attempts to initialize the drive fail with a "fatal hardware error". I then plugged in the same adapter and WD SSD into another HP laptop running Windows 10, and everything works flawlessly and was able to clone my internal drive to the new drive. That of course doesn't help as I am trying to clone the internal SSD from the Windows 11 HP laptop. Any ideas or suggestions would be welcome as to how I get this to work/initialize properly.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.