Upgrading RAM

[Chetanrao8]

Adobe After Effects cc 2015, 2017 & 2018 lags making it impossible to work.

Can upgrading RAM from 8GB to 16GB helps in anway?

[Jeet_singh]

@Chetanrao8,

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I see from your post you are having issues with the computer lags. Don't worry we'll work together to help you find a solution.

To provide you with an accurate solution, I'll need a few more details:

Is it happening only while using adobe applications or does the computer freezes everytime?

Have you ensured all the drivers are updated either using Windows update or using HP support Assistance. 

Have you tried to update the Bios.

Have you tried to run a test on the computer from F2?

In the meantime, let's try these steps here: 

Here's an article which should help you with this issue - Click here

Let's start off by performing a Hard reset on the PC: 

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a "Hard Reset". Use the following steps to perform a hard reset on a computer:

1. If Windows is open, click Start and then Shutdown.

If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.

2. With the power off, disconnect the power cord from the back of the computer.

3. With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.

4. Reconnect the power cord and turn on the power.

Let's start off by updating the drivers using Windows update: 

1) In the search box, type and open Windows Updates. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer.

If the issue persists, I would suggest here is to uninstall the display drivers from device manager:

Display drivers:

Use shortcut keys Win + X on Windows 10

Select Device Manager.

Expand the entry. Right-click the problematic device and select Uninstall device.

You may need to check the option Delete the driver software for this device, and then click the Uninstall button.

Now restart the computer and then update the Bios, and graphics card drivers from our HP support website, using this link.

If the issue persists, I would suggest here is to uninstall the HP Support Assistant from the control panel and then reinstall the latest version.

Download and install HP support assistant on your PC. It should automatically download and install the latest updates and drivers for your PC.

Refer this link to know how to use HP support assistant.

I would suggest you enable Fast Start-Up on the system and check if it helps. To do this, follow the steps below.
1. Open Control Panel and go to Power Options.
2. Click/tap on the Choose what the power buttons do link on the left side.
3. Click/tap on the Change settings that are currently unavailable link at the top.
4. If prompted by UAC, then click/tap on Yes. 
5. Ensure that Turn on Fast Startup is checked.
6. Restart the computer.

If the issue still persists after trying out the steps try the steps recommended below.

In Windows, search for Command Prompt. In the search results, right-click Command Prompt and select Run as administrator. Then click Yes.
In Command Prompt, type sfc /scannow. Make sure to include the space between sfc and the /.
Press Enter and wait while System File Checker scans for corrupted files.
When scanning is complete, the results are displayed on the screen.
If the file checker found and replaced any corrupted files, restart the computer and check the performance.
If the file checker did not find any corrupted files or found corrupted files but could not replace them, go to the next step.
If System File Checker finds corrupted files but cannot replace them, use the Deployment Image Servicing and Management (DISM) tool. DISM checks the corrupted files; then downloads and replaces the files using Windows Update.
In Windows, open a web browser.
   NOTE:
You need to be connected to the Internet to use DISM.
In Windows, search for Command Prompt. In the search results, right-click Command Prompt and select Run as administrator. Then click Yes.
In Command Prompt, type dism.exe /Online /Cleanup-image /Restorehealth. Make sure to include the space before each / in the command line.
Press Enter and wait while DISM works. This might take several minutes.
If DISM finds corrupted files, it replaces them using Windows Update. If this occurs, after DISM is finished, restart your computer and see if the performance has improved.

For more details, please follow this link: HP PCs - Computer Is Slow (Windows)

Refer this article to further troubleshoot lock up or freezing issues with PC. Click Here

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.