Upgrading Vram after 32Gb Ram Installation

[CoreyAndo]

Problem: (Trying to figure out how to set Vram to a higher limit and dedicated more Ram towards graphics)

So I've recently upgraded the ram on my HP 14-Dq2XXX Laptop, originally having 12GB Ram, I have since installed 2x 16GB 3200Mhz sticks (32GB Total, which is the cap). I've noticed a general improvement over all tasks, after this I tried to set the Vram (Video Ram) to a higher limit, dedicating more Ram towards Vram in the BIOS settings like I've done in the past on other laptops but didn't see any options on my device.

I'm wondering if I've missed something or if there is an alternative way to dedicated more Ram towards VRam (It currently says 128MB, I'd like to set this to 512, 1024 or higher depending on limits)

[Nal_NR]

Hi @CoreyAndo,

Welcome to the HP Support Community. 

I'd like to help!

Excellent description and a great diagnosis. It is greatly appreciated.           

As we have limited support boundaries in the support community as of now. I would request you to contact our HP Support Engineers who should be able to sort this out for you via remote assistance.

For that to happen, we will give you additional instructions/information via Private Message.

Please check your inbox on the forums page for the private message.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!