Upgrading to m.2 PCIe NVMe SSD

[Prem24]

I want to update my laptop with ssd but as i read in the manual it supports ● 512-GB, 2280, Peripheral Component Interconnect Express (PCIe), Non-Volatile Memory Express (NVMe)
solid-state drive 

But i wanted to upgrade it to 1tb ssd I am having samsung nvme pm961 ssd 1tb ll it support my laptop or is there any restriction limit upto 512 gb bec in manual 1tb realted information is not mentioned

One more doubt after upgrading it should i remove my old hhd will it affect the performance if i am using both at a same time?

[banhien · Accepted solution]

@Prem24 

Its its  an   HP ENVY x360 - 15m-bp112dx  ? Its specs

            https://support.hp.com/au-en/document/c05803125

You can add M.2 NVMe SSD to your machine using

            https://www.samsung.com/au/memory-storage/970-evo-nvme-m2-ssd/MZ-V7E2T0BW/
            https://www.crucial.com/products/ssd/crucial-p2-ssd
            https://www.crucial.com/products/ssd/crucial-p5-ssd
     Or similar from reputable vendors.
           One example (compatible drive, can use smaller/larger capacity)
                        https://www.crucial.com/ssd/p5/ct1000p5ssd8/ct18122582

Regards.

[Prem24]

I also have one query can we use ssd that comes with heat sink in laptop ? Is there enough space ? Or we need to remove the heat sink and use the ssd! The ssd like XPG s40g ssd and wd black sn750 which comes with heat sink

[Prem24]

As you suggested . I have installed samsung 970 evo plus but it is not giving full speed when I checked it's bus PCIe interface it show's 3.0×1 bec of which i am not getting full speed how to allow it to run on PCIe 3×4 to get the most of it because ssd speed got restricted becomes of this transfer mode